Welcome! Here are the website rules, as well as some tips for using this forum.

Need to contact us? Visit https://heatinghelp.com/contact-us/.

Click here to Find a Contractor in your area.

Hot water for a gym and fitness center in NYC

Options

JohnNY

JohnNY Member Posts: 3,230

October 2022 in Domestic Hot Water

We're finishing this new gym in the next two weeks. They expect up to 18 showers to be running at once between the men's and ladies' locker rooms. PVI was picked for the job. I have to admit...it's a well designed and built water heater. Simple and shiny stainless steel throughout.

Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
Consulting & Troubleshooting
Heating in NYC or NJ.
Classes

STEVEusaPA

pecmsg

GGross

EdTheHeaterMan

PC7060

6

Comments

ScottSecor Member Posts: 855

October 2022
Options
Looks like a quality job. Are they using the Lochinvar units for dhw also?

0
pecmsg Member Posts: 4,845

October 2022
Options
Electrify that

0
pedmec Member Posts: 973

October 2022
Options
Thats a lot of money on pvi's.

0
Larry Weingarten Member Posts: 3,293

October 2022
Options
Hi, Are they using 2.5 gpm showerheads? 🤔
Yours, Larry

0
JohnNY Member Posts: 3,230

October 2022
Options
ScottSecor said:
Looks like a quality job. Are they using the Lochinvar units for dhw also?
No. Those are for hydro-air coils by the HVAC contractor....whole 'nother story involving the question "What's a low water cutoff?"

Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
Consulting & Troubleshooting
Heating in NYC or NJ.
Classes
0
JohnNY Member Posts: 3,230

October 2022
Options
pedmec said:
Thats a lot of money on pvi's.
Yeah, they're $30,000 each. Times three. What the heck. It's only money, right?

Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
Consulting & Troubleshooting
Heating in NYC or NJ.
Classes
0
JohnNY Member Posts: 3,230

October 2022
Options
Larry Weingarten said:
Hi, Are they using 2.5 gpm showerheads? 🤔
Yours, Larry
Hi, Larry. The job is subject to NYC Dept of Buildings inspection, so I'm guessing they are 2.5 at most.

Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
Consulting & Troubleshooting
Heating in NYC or NJ.
Classes
1