Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Hot water for a gym and fitness center in NYC

JohnNY
JohnNY Member Posts: 3,057
in Domestic Hot Water
We're finishing this new gym in the next two weeks. They expect up to 18 showers to be running at once between the men's and ladies' locker rooms. PVI was picked for the job. I have to admit...it's a well designed and built water heater. Simple and shiny stainless steel throughout.
Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
Consulting
Plumbing in NYC or in NJ.
Take his class.
STEVEusaPAheatheadpecmsgGGrossEdTheHeaterManPC7060

Comments

  • ScottSecor
    ScottSecor Member Posts: 642
    Looks like a quality job.  Are they using the Lochinvar units for dhw also? 
  • pecmsg
    pecmsg Member Posts: 3,571
    Electrify that
  • pedmec
    pedmec Member Posts: 713
    Thats a lot of money on pvi's.
  • Larry Weingarten
    Larry Weingarten Member Posts: 2,785
    Hi, Are they using 2.5 gpm showerheads? 🤔
    Yours, Larry
  • JohnNY
    JohnNY Member Posts: 3,057
    ScottSecor said:

    Looks like a quality job.  Are they using the Lochinvar units for dhw also? 

    No. Those are for hydro-air coils by the HVAC contractor....whole 'nother story involving the question "What's a low water cutoff?"
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting
    Plumbing in NYC or in NJ.
    Take his class.
  • JohnNY
    JohnNY Member Posts: 3,057
    pedmec said:

    Thats a lot of money on pvi's.

    Yeah, they're $30,000 each. Times three. What the heck. It's only money, right?
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting
    Plumbing in NYC or in NJ.
    Take his class.
  • JohnNY
    JohnNY Member Posts: 3,057
    Larry Weingarten said:

    Hi, Are they using 2.5 gpm showerheads? 🤔
    Yours, Larry

    Hi, Larry. The job is subject to NYC Dept of Buildings inspection, so I'm guessing they are 2.5 at most.
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting
    Plumbing in NYC or in NJ.
    Take his class.
    Larry Weingarten

Categories