Burnham Alta Combi Experience?
Has anyone has any experience with the Burnham Alta Combi Boilers? I have a house with Hydronic and I am looking to convert from Oil to Gas.
Thanks,
Pat
Comments
-
Being a service tech ....BoschI have enough experience to know , that I dont know it all0
-
Nobody has responded to you, and I'm not knowledgeable, but what I've read here is to go with what your chosen contractor suggests, since that is the install they have been trained on.0
-
Lochinvar gets good comments from many and we don't seem to get many bad reports about them.0
-
That's all fine and good if the contractor suggest a quality product. I had a plumber recently recommend a Navien. He said that's all he installs. After watching hours and hours of Mike Pipes videos documenting failed and consistent issues after 7 to 8 years of service with Naviens', I don't think I would be installing a Navien in my house.In_New_England said:Nobody has responded to you, and I'm not knowledgeable, but what I've read here is to go with what your chosen contractor suggests, since that is the install they have been trained on.
2 -
i'm a lochinvar boiler guy.0
-
HTP and Viessman are good too. Take a look at what the controls can do compared to what you need them to do.0
-
Good to know. Thanks!pedmec said:i'm a lochinvar boiler guy.
0 -
Thanks. Will check them out!mattmia2 said:HTP and Viessman are good too. Take a look at what the controls can do compared to what you need them to do.
0 -
-
Purchase something that the installer has confidence in, and parts are available locally. If you are purchasing and installing the unit yourself, make sure you are getting a good warranty, and make peace with ordering parts yourself and the lead time that may come with that. Mod-con boilers have more proprietary components than older boilers.
I would trust in my home, Viessmann, Triangle Tube, IBC, Lochinvar, Burnham and a few others that don't come to mind. My choice would be within this range, and make sure parts are available locally2 -
Thanks for the advise. I would be doing the install myself but since there is no gas currently at the house, a licensed plumber needs to perform the install as per the utility company. It seems like there are a lot of Burnham installers in my area. There are a couple of Lochinvar, and Viessmann installers as well.GGross said:Purchase something that the installer has confidence in, and parts are available locally. If you are purchasing and installing the unit yourself, make sure you are getting a good warranty, and make peace with ordering parts yourself and the lead time that may come with that. Mod-con boilers have more proprietary components than older boilers.
I would trust in my home, Viessmann, Triangle Tube, IBC, Lochinvar, Burnham and a few others that don't come to mind. My choice would be within this range, and make sure parts are available locally0
Categories
- 117.8K All Categories
- 82.9K THE MAIN WALL
- 2.7K A-C, Heat Pumps & Refrigeration
- 44 Biomass
- 406 Carbon Monoxide Awareness
- 10 Chimneys & Flues
- 1.6K Domestic Hot Water
- 4.3K Gas Heating
- 107 Geothermal
- 149 Indoor-Air Quality
- 2.7K Oil Heating
- 45 Pipe Deterioration
- 695 Plumbing
- 4.9K Radiant Heating
- 353 Solar
- 13.3K Strictly Steam
- 2.9K Thermostats and Controls
- 48 Water Quality
- 31 Industry Classes
- 65 Job Opportunities
- 12 Recall Announcements