Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
No heat
fishingfool123
Member Posts: 1
in Gas Heating
Changed a zone valve then boiler won't fire unless tester arcs across to anything metal
0
Comments
-
Time to call competent pro.
There was an error rendering this rich post.
1 -
This ^^^. Something is miswired -- but if a tester arcing across to metal is the way you are searchng for the problem, you stand a good chance of doing terminal damage to some very expensive electronics.Br. Jamie, osb
Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England
2 -
A change from what kind of valve to what kind? I don't know what you mean. A little more information, forthcoming? A pic of your valve wiring, please.
1
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 976 Plumbing
- 6.3K Radiant Heating
- 387 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements