Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Replace Ancient Cast Iron Steam Radiator with Modern Flat Unit
Options
douglass
Member Posts: 1
Hello,
I am renovating a condo in a pre-war apartment building in NYC. I want to replace a single pipe steam cast iron radiator with a modern flat wall mounted units. Does anyone have any advice/experience with this kind of project? Vendor recommendations would be helpful as well. Thanks.
I am renovating a condo in a pre-war apartment building in NYC. I want to replace a single pipe steam cast iron radiator with a modern flat wall mounted units. Does anyone have any advice/experience with this kind of project? Vendor recommendations would be helpful as well. Thanks.
0
Comments
-
Do you have independent control of the steam delivery to your unit? Basically your own thermostat?0
-
-
Categories
- All Categories
- 85.6K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 60 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 375 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements