Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Quality boiler drain valve
dbsoccer
Member Posts: 34
When the weather warms up a bit, I will be faced with repairing or replacing my boiler's drain valve. I am looking for a recommendation for a brand/model that will be reliable.
Any input would be much appreciated.
Any input would be much appreciated.
0
Comments
-
get a ball valve, you can find a 3/4 FIP X hose version, much better than a boiler drain for flushing and draining.Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream
4 -
Thanks Bob.0
-
I like this type a lot. You may need a nipple depending on your application. I even used them the last time i needed a supply for a washer.
https://www.supplyhouse.com/Webstone-40313W-3-4-Female-x-Hose-Full-Port-Ball-Valve-Lead-Free0
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements