Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Too much for Vegas?
Options
Tinman
Member Posts: 2,808
Not in my opinion π
Steve Minnich
0
Comments
-
-
π I think Iβm just going to upgrade the existing AC systems.
Added some detail and flipped the DHW circ. Forgot to do that before the first pic.
Steve Minnich0 -
I like the design and the software sure is pretty.
The indirect circ sure is a long way from the PONPC. I think I'd flip it to the supply."If you can't explain it simply, you don't understand it well enough"
Albert Einstein0 -
Point taken. The bulk of this is already piped on painted sheet of 3/4β plywood. I havenβt even bought the indirect yet and the tank/makeup water assembly is on a separate 2β x 4β sheet not yet tied in. Options abound.Steve Minnich0
-
-
-
Is that bad?Steve Minnich0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 160 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 848 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements