Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Too much for Vegas?

Steve Minnich
Steve Minnich Member Posts: 2,868
in THE MAIN WALL
Not in my opinion 😎


Steve Minnich

Comments

  • Zman
    Zman Member Posts: 7,611
    Where's the chiller! :D
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
    Steve Minnich
  • Steve Minnich
    Steve Minnich Member Posts: 2,868
    πŸ˜‚ I think I’m just going to upgrade the existing AC systems.

    Added some detail and flipped the DHW circ. Forgot to do that before the first pic.
    Steve Minnich
  • Zman
    Zman Member Posts: 7,611
    I like the design and the software sure is pretty.
    The indirect circ sure is a long way from the PONPC. I think I'd flip it to the supply.
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
  • Steve Minnich
    Steve Minnich Member Posts: 2,868
    Point taken. The bulk of this is already piped on painted sheet of 3/4” plywood. I haven’t even bought the indirect yet and the tank/makeup water assembly is on a separate 2’ x 4’ sheet not yet tied in. Options abound.
    Steve Minnich
  • hot_rod
    hot_rod Member Posts: 24,564
    I have some drawings showing the various paths to the Ponpc with the tank in different locations, and how to calculate the best location. On another computer I can attach tomorrow.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
    Steve Minnich
  • unclejohn
    unclejohn Member Posts: 1,833
    @Steve Minnich You made me look at the first picture for over 10 mins.
    Solid_Fuel_Man
  • Steve Minnich
    Steve Minnich Member Posts: 2,868
    Is that bad?
    Steve Minnich

Categories