Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
How to troubleshoot ecm motor
Dairon421
Member Posts: 80
in Gas Heating
I ran across a ecm motor today that gave me the flux. If you ran across this motor what will be your steps to troubleshoot it.
0
Comments
-
-
I think there are some U tube videos on the subject0
-
I have an ECM driver which I use to troubleshoot. I'll get you some info when I'm closer.Serving Northern Maine HVAC & Controls. I burn wood, it smells good!0
-
Just don't use the little key chain with the spinner thing to determine if the rotor is turning. It'll only tell you if the stator is seeing power, generating a magnetic field intended to drive the magnetic rotor.0
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 878 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements