Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

HTP Fire Tube Boiler overheating

Options
Redicliff
Redicliff Member Posts: 1
We have an HTP flash heater MC-100 that is overheating.
I've posted a 1.5 min video of the control panel as the unit cycles.
https://www.dropbox.com/s/cuakr4pa010f2xq/HTP Boiler Overheating.mov?dl=0

Not finding corresponding troubleshooting recommendations in the manual. Of course, if it's there, it probably reads "call a certified tech". But, we're sheltered in place a long ways from a tech.

Comments and recommendations appreciated

Welcome

It looks like you're new here. Sign in or register to get started.

Comments

  • kcopp
    kcopp Member Posts: 4,576
    From the description you are not getting flow. Is something shut off, circulator broken or debris plugging the piping?
    ZmanGroundUpBillyO
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 18,120
    Or no or low water pressure in the system.
  • fenkel
    fenkel Member Posts: 162
    Check your pumps..water isnot moving thru HX..
  • GroundUp
    GroundUp Member Posts: 2,362
    Not enough flow, can hear it boiling in the HX. How's it piped?
  • hot_rod
    hot_rod Member Posts: 25,266
    they can be tricky to purge the boiler on fire tube design. i have had to hold the relief valve open if you do not have enough purge flow or pressure.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • fenkel
    fenkel Member Posts: 162
    Whats the boiler pressure? Should be a guage under the boiler?
    Upload more pictures, sometimes we can see issues..
  • Rich_49
    Rich_49 Member Posts: 2,781
    If this in fact an MC series boiler , it is not a firetube . MC Series was a water tube boiler
    You didn't get what you didn't pay for and it will never be what you thought it would .
    Langans Plumbing & Heating LLC
    732-751-1560
    Serving most of New Jersey, Eastern Pa .
    Consultation, Design & Installation anywhere
    Rich McGrath 732-581-3833
    kcopp
  • fenkel
    fenkel Member Posts: 162
    How old is boiler?
    Could HX be plugged?

Welcome

It looks like you're new here. Sign in or register to get started.

Welcome

It looks like you're new here. Sign in or register to get started.