Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

IR temp gun

adamt
adamt Member Posts: 16
Hello all, any recommendations on an IR temp gun? I heard they might not work well on shiny copper pipes due to reflection. Is there a better way to measure the water temp on a zone without a pre-installed gauge?


Comments

  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 15,453
    You can use an electronic thermometer with a probe (Fluke 51/52) or some electrical testers have a temperature setting.

    spray painting the copper black will work with an IR gun
  • Larry Weingarten
    Larry Weingarten Member Posts: 3,273
    Hello, I like the FLIR One and paint or tape on new copper will help.
    Yours, Larry
    ratioJohnNY
  • Jamie Hall
    Jamie Hall Member Posts: 23,168
    Electrician's tape wrapped around the pipe works fine.
    Br. Jamie, osb
    Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England
    steamedchicago
  • ratio
    ratio Member Posts: 3,616
    @Larry Weingarten's got it with the FLIR ONE and tape. I've got the ONE Pro and it's got a great picture. The image overlay works good too. (NB: I don't have a $50k model to compare it with.) Attached is a pic from mine, to give you an idea of what you can expect.
  • hot_rod
    hot_rod Member Posts: 22,024
    30 bucks buys a good temperature gun
    Flat black marker or friction tape, nothing shiny
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
    rick in Alaska
  • Gordy
    Gordy Member Posts: 9,546
    edited December 2019
    Keep in mind the aspect ratio when using.

    You need to be right up close to the target.
  • ChrisJ
    ChrisJ Member Posts: 15,589
    Gordy said:

    Keep in mind the aspect ratio when using.

    You need to be right up close to the target.

    And the IR gun needs to be stabilized at the room temperature otherwise it'll drift as it changes.
    Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment
  • adamt
    adamt Member Posts: 16
    Thank you for all of the comments and feedback.
  • HVACNUT
    HVACNUT Member Posts: 5,804
    I guess IR has its place but I'll always use a clamp on. I can capture with it too.