Megapress fittings

Options
SeanBeans
SeanBeans Posts: 525
in THE MAIN WALL
So I have been tasked with running a new steam main and all of the corresponding run outs to the rads..

I haven’t been there yet but I’ve been told that the pipes coming down have all been sawzalled nearish the floor joists.

Do they make reducing megapress elbows? I doubt they make eccentric bushing..

My other option would be to really start from scratch and start from the rad and work my way down

Comments

  • JUGHNE
    JUGHNE Posts: 11,645
    Why would they have cut them off.....thinking of more head room?
    Megapress is good for steam?
    I think the dead men piped from the main up.....no unions.
  • Dave0176
    Dave0176 Posts: 1,183
    I’d start from scratch, BUT that’s me, no mega press for me.

    DL Mechanical LLC Heating, Cooling 732-882-2267 Specializing in Steam Heating

  • GW
    GW Posts: 5,257
    Can’t you couple on, the floor above? If they chopped the pipe too tight it’s not your fault
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com
  • The Steam Whisperer
    The Steam Whisperer Posts: 1,328
    I've used a welder for that. I understand some contractors cut them off flush so the system can be salvaged easily so they can sell them a new system
    To learn more about this professional, click here to visit their ad in Find A Contractor.
  • SeanBeans
    SeanBeans Posts: 525
    The company’s thought is to just use the mega press to get out of the joist and use black iron for the rest
  • EBEBRATT-Ed
    EBEBRATT-Ed Posts: 21,201
    if they cut them flush you may have trouble getting the gun on straight without hitting the next floor joist. It's rated for lp steam. no reducing ells, no eccentrics ....couplings and elbows and not much more.

    If there's union on the rads maybe you can break the unions and let them drop go downstairs and press a coupling on......if you have trouble getting the gun on that is
  • SeanBeans
    SeanBeans Posts: 525
    When I learned about the job, the guy who told me about it said that he cut the pipes. And he assumed he would be the one going back.. so I think that he cut them with enough room to work on them.. we hope!

    It got pushed back til around Labor Day

Categories