Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Was it time to replace this?

Options
bob eck
bob eck Member Posts: 930
in THE MAIN WALL
9 years in a Triangle Tube PE110 Natural Gas boiler. This boiler does heating and domestic hot water with a built in 10 gallon SS IDWH.

This igniter lasted a long time.




Comments

  • DZoro
    DZoro Member Posts: 1,048
    Was it still lighting ? Or is that why you were there?
    Hopefully the new one will last as long as the old :)
    D
  • bob eck
    bob eck Member Posts: 930
    It was on a hard lock out and when it fired you could hear a little boom as to much gas before it would light.
  • Steamhead
    Steamhead Member Posts: 18,203
    Yup, time for a new one.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,642
    I just had the same problem with an 8-year old TT Prestige Solo 110 in Berkeley. Most of the time, the boiler wouldn't light, but when it did, it did a mini-explosion.
    The igniter looked exactly like yours; deformed and too large of a gap. New igniter fixed the problem.
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
  • ratio
    ratio Member Posts: 4,176
    What is this maintenance of which you speak? Is it French?
    Solid_Fuel_Man
  • Solid_Fuel_Man
    Solid_Fuel_Man Member Posts: 2,644
    French pronounce it: main-teh-nen-ssss in those 4 distinct syllables. 😁
    Serving Northern Maine HVAC & Controls. I burn wood, it smells good!
    kmt803

Categories