Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Unico blunders
Options
GW
Member Posts: 5,184
We took out a roaring 3 1/2 ton and installed a 2 1/2 ton, now it purrs like a kitten, cleaned up some trunk lines.
Apparently the owners has issues with the original hvac contractor 15 years ago, the hvac guy kept adding mini-duct to quiet down the system, So, we simply removed all the excess. There must be 60-70' in this pic, i wish i measured it!
Apparently the owners has issues with the original hvac contractor 15 years ago, the hvac guy kept adding mini-duct to quiet down the system, So, we simply removed all the excess. There must be 60-70' in this pic, i wish i measured it!
0
Comments
-
Slightly over-sized was it?
Unico's love a perimeter loop
1 -
they had loops of mini duct just dangling about. The amount of outlets didn't change Oh wait, yes it did, they had one outlet blowing in an attic/knee wall area! we capped/patched that one off at the trunk.
1
Categories
- All Categories
- 87.6K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 429 Carbon Monoxide Awareness
- 124 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 119 Geothermal
- 168 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 394 Solar
- 16K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements