Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Unico blunders
Options
GW
Member Posts: 5,043
We took out a roaring 3 1/2 ton and installed a 2 1/2 ton, now it purrs like a kitten, cleaned up some trunk lines.
Apparently the owners has issues with the original hvac contractor 15 years ago, the hvac guy kept adding mini-duct to quiet down the system, So, we simply removed all the excess. There must be 60-70' in this pic, i wish i measured it!
Apparently the owners has issues with the original hvac contractor 15 years ago, the hvac guy kept adding mini-duct to quiet down the system, So, we simply removed all the excess. There must be 60-70' in this pic, i wish i measured it!
0
Comments
-
Slightly over-sized was it?
Unico's love a perimeter loop
1 -
they had loops of mini duct just dangling about. The amount of outlets didn't change Oh wait, yes it did, they had one outlet blowing in an attic/knee wall area! we capped/patched that one off at the trunk.
1
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 113 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 106 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 981 Plumbing
- 6.3K Radiant Heating
- 388 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements