Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Hot water zone off steam boiler AQUA STAT

BillAllen
BillAllen Member Posts: 103
in Thermostats and Controls
Where is the best place to install the L4006 so it reads the best Temps for the hot water zone? I'v done a few of these but no enough to remember where the Aqua stat is located. Thoughts?

Comments

  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,672
    On the supply to the zone.
    Retired and loving it.
    BillAllen
  • Big Ed_4
    Big Ed_4 Member Posts: 3,300
    Why there and not the boiler ?

    There was an error rendering this rich post.

  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,672
    LOL. My mistake, Big Ed. Sleepy. Thanks.
    Retired and loving it.
  • BillAllen
    BillAllen Member Posts: 103
    Thanks for the tip. I take it the Thermometer should be there too?
  • BillAllen
    BillAllen Member Posts: 103
    Big Ed, There are no ports on the steam boiler to install the Aqua stat. FYI.
  • BillAllen
    BillAllen Member Posts: 103
    Thanks for the discussion tips. I am near finished with the boiler but I still have not wired the L4006 I do not know where to tie in the wiring. I have a clue but not certain. Any tips? The boiler is a W/M EG40. HW loop below steam. All good except wiring the aqua stat

Categories