Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Hot water zone off steam boiler AQUA STAT

Where is the best place to install the L4006 so it reads the best Temps for the hot water zone? I'v done a few of these but no enough to remember where the Aqua stat is located. Thoughts?

Comments

  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,513
    On the supply to the zone.
    Retired and loving it.
    BillAllen
  • Big Ed_4
    Big Ed_4 Member Posts: 2,761
    Why there and not the boiler ?
    I have enough experience to know , that I dont know it all
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 16,513
    LOL. My mistake, Big Ed. Sleepy. Thanks.
    Retired and loving it.
  • BillAllen
    BillAllen Member Posts: 103
    Thanks for the tip. I take it the Thermometer should be there too?
  • BillAllen
    BillAllen Member Posts: 103
    Big Ed, There are no ports on the steam boiler to install the Aqua stat. FYI.
  • BillAllen
    BillAllen Member Posts: 103
    Thanks for the discussion tips. I am near finished with the boiler but I still have not wired the L4006 I do not know where to tie in the wiring. I have a clue but not certain. Any tips? The boiler is a W/M EG40. HW loop below steam. All good except wiring the aqua stat