In-house programming of a Honeywell Excel 5000 system

Options
Andrew Rudin
Andrew Rudin Posts: 29
in Thermostats and Controls
I am working with a large school. Four of its large air handlers are controlled by Honeywell's Excel 5000 system. I want to know if this system can be completely programmed in-house, or whether it requires using the installing contractor.

Thanks, Andy Rudin

Comments

  • the_donut
    the_donut Posts: 374
    edited February 2018
    Do you have a Xl581 or Xl582 interface?
  • ratio
    ratio Posts: 4,329
    It requires the software & the interface to program it. After than, it's much easier to start with the original programming files—IIRC some network connections can't be pulled out of the system & will need to be recreated by hand.

Categories