Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

First floor calls for heat boiler (short cycle) banging pipes

Options
jogrady
jogrady Member Posts: 5
in THE MAIN WALL
I changed the thermostat and replaced expansion tank which was full of water. The two other zones work fine. Could it be the zone valve is bad and causing this problem

Comments

  • Jamie Hall
    Jamie Hall Member Posts: 26,840
    It could. Could be a few other things, too...
    Br. Jamie, osb
    Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England
  • JUGHNE
    JUGHNE Member Posts: 11,513
    Would you have a Honeywell zone valve installed backwards?
  • HVACNUT
    HVACNUT Member Posts: 7,233
    You replaced the thermostat and extrol to remedy the problem? Sounds like it's air bound. How's the air eliminator(s)?
  • JUGHNE
    JUGHNE Member Posts: 11,513
    Is the zone valve opening? Some have manual over ride.
    Return valve closed or flow/check not opening?

Categories