Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Nitrogen Leak Dectector

radmix
Member Posts: 194
I'm looking for a good quality nitrogen leak detector for finding leaks using nitrogen as a pressure test.
0
Comments
-
Ultrasonic. Perhaps an IR sensor, but I'm not sure that the ΔT of expanding N2 will be enough, certainly compared to a refrigerant.
I've used one of these before, but it was as loaner and I ended up finding the leak without it, so not a lot of experience with it. It's on my list of Things to Get, FWIW.
0 -
The ones I've been looking at also need a tracer element H2 hydrogen @ 2% to detect. Does nitrogen purchased at my local gas company have this element mixed in?0
-
Dunno, but the N2 I get around here is supposed to be good & clean. I hear (but can't speak to it's validity, although I believe it) that it's cleaner than medical-grade gas, as the water vapor content is lower than what's permitted for medical use. Certainly, using H2-contaminated gas wouldn't be such a good idea for purge use.
H2 is a combustible gas, I would expect any combustible gas detector to pick it up. Is there any reason why you can't use a refrigerant gas detector? It can be used as a trace gas with nitrogen as well.
0
Categories
- 113.2K All Categories
- 81.3K THE MAIN WALL
- 2.5K A-C, Heat Pumps & Refrigeration
- 37 Biomass
- 394 Carbon Monoxide Awareness
- 2.7K Controls
- 1.4K Domestic Hot Water
- 3.9K Gas Heating
- 101 Geothermal
- 135 Indoor-Air Quality
- 2.4K Oil Heating
- 33 Pipe Deterioration
- 589 Plumbing
- 4.4K Radiant Heating
- 335 Solar
- 12.4K Strictly Steam
- 40 Water Quality
- 18 Industry Classes
- 54 Job Opportunities
- 8 Recall Announcements