Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Ok to trim the bottom tab on a taco hy-vent?

Options
Leon82
Leon82 Member Posts: 684
in THE MAIN WALL
It looks like it just stops it from traveling upwards into the body.

Comments

  • Danny Scully
    Danny Scully Member Posts: 1,465
    And why would you need to trim it?
  • Leon82
    Leon82 Member Posts: 684
    I was good g to put it into a 1/8 ball valve and am worried it will bottom on the ball
  • Ironman
    Ironman Member Posts: 7,858
    I don't think Taco made it that long just to get rid of some extra brass.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • HVACNUT
    HVACNUT Member Posts: 7,233
    I've nipped a couple millimeters off the stem to clear for a 1/8" ball valve. Never had a problem.
    Leon82
  • Dave H_2
    Dave H_2 Member Posts: 621
    Shouldn't be a problem with trimming, however another option that we started last making last year is a 1/8" check valve instead.

    When using you take the stem out of the vent.

    Dave H.

    Dave Holdorf

    Technical Training Manager - East

    Taco, Inc

    Leon82

Categories