Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
have you ever seen one of these?
pardon_my_ignorance
Member Posts: 18
I ran into a "Flow Stat, #400" manufactured in Brooklyn, N.Y. I've never seen one and wonder if anyone can tell me more about it and it's function/operating features. It was originally installed sometime in the early sixties. A Taco 571 valve, with t'stat, is immediately downstream from it, but don't know if they are competing with each other (the taco could have been a later add-on). thanks
0
Comments
-
Do you have a pic. Sounds like a check valve.
There was an error rendering this rich post.
0 -
i do have 2 pics, if i can figure out how to send them to you0
-
Click on the portrait icon above the dialogue box to upload pics from your device.pardon_my_ignorance said:i do have 2 pics, if i can figure out how to send them to you
Bob Boan
You can choose to do what you want, but you cannot choose the consequences.0 -
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 159 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 945 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements