Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Before/After Change-Out

Dan Foley
Dan Foley Member Posts: 1,268
in THE MAIN WALL
Replaced this one yesterday. I helped Dragon and his crew pop this one in (which means I stayed out of his way and handed him tools).
Rich_49

Comments

  • Canucker
    Canucker Member Posts: 723
    That looks sharp.
    You can have it good, fast or cheap. Pick two
    Dan Foley
  • clammy
    clammy Member Posts: 3,232
    Nice work mr foley as always DFDFW = dan foley does fine work peace and good luck clammy

    R.A. Calmbacher L.L.C. HVAC
    NJ Master HVAC Lic.
    Mahwah, NJ
    Specializing in steam and hydronic heating

  • Danny Scully
    Danny Scully Member Posts: 1,465
    edited March 2017
    It's beautiful as always @Dan Foley, but please, get 7/8 OD x 3/4 MIP adaptors for the relief valve! :lol:
  • Dan Foley
    Dan Foley Member Posts: 1,268
    @Danny Scully,

    We use a 3/4" MPT x 3/4 PP union on the relief valve to allow for easy replacement without having to cut the drip pipe.
  • Danny Scully
    Danny Scully Member Posts: 1,465
    edited April 2017
    No I understand @Dan Foley . We use the compression adaptors for the same purpose. They also make them as elbows.
  • Dan Foley
    Dan Foley Member Posts: 1,268
    Makes sense. Great idea!
  • DC123
    DC123 Member Posts: 69
    Thanks to Dan and his crew for a great job - they also fixed up a ton of poor piping from the prior installation.
  • kcopp
    kcopp Member Posts: 4,598
    Nice Fernox TF1

Categories