Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Looking for Control replacement, Capable Controls?

GW
GW Member Posts: 4,691
Hello, local peerless vendor doesn't have this in stock, anyone know if there's a universal? Tim are you online this morning? Thank you
Gary Wilson
Wilson Services, Inc
Northampton, MA
gary@wilsonph.com

Comments

  • GW
    GW Member Posts: 4,691
    Sorry it didn't load as an image
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com
  • Tim McElwain
    Tim McElwain Member Posts: 4,612
    Sam 81 got it right the S8610U will replace this control. Capable is sort of a copy of Honeywell controls along with another company called ICM.
  • GW
    GW Member Posts: 4,691
    Thaks! Tim so in general if I see Capable or ICM I'm good with the Universal Honeywell?
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com
  • Tim McElwain
    Tim McElwain Member Posts: 4,612
    Yes as far as Intermittent pilot and HSI. The S8610U from Honeywell covers Int Pilot the S8910U covers HSI. Capable also has a comparable version to Honeywell DSI which is replaced by the S87 or S89 for Direct Spark Ignition.
  • GW
    GW Member Posts: 4,691
    Awesome thanks!
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com
  • GW
    GW Member Posts: 4,691
    Tim, I'm stick trying to pick away at my notes, so there are no universal S87 or S89? No sense on keeping those on the truck right?
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com
  • Tim McElwain
    Tim McElwain Member Posts: 4,612
    The S87 and S89 for Direct Spark are OEM controls with no Universal replacement from Honeywell for DSI controls.
    GW
  • GW
    GW Member Posts: 4,691
    OK good to know, I don't see these DSI controls much, but good to know. Thanks
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com
  • Tinman
    Tinman Member Posts: 2,808
    @GW - Many control manufacturers, if not all, have cross reference tools on their websites. And, at least, have cross reference lists or spreadsheets. Honeywell and White Rodgers/Emerson have for a long time..
    Steve Minnich
  • GW
    GW Member Posts: 4,691
    Yes thanks I know about the charts, I hardly ever see DSI though. And the Capable Controls isn't listed on the S8610U sheet.

    Are the pages on the web sites able to be loaded into a spreadsheet? Thet would be great to build a library, load into Google drive
    Gary Wilson
    Wilson Services, Inc
    Northampton, MA
    gary@wilsonph.com
  • Tinman
    Tinman Member Posts: 2,808
    Gotcha. I've been seeing more and more of those Capable Controls too. The name itself worries me a little. : )
    Steve Minnich
  • Tim McElwain
    Tim McElwain Member Posts: 4,612
    They are basically a knock off same as ICM controls.
    Tinman