Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Help with edr
bigsteamedp
Member Posts: 20
Hi,
I'm hoping to get a little confirmation on what I've calculated for the EDR of this Rad. I'm thinking about 10 per section or 90 edr
Here's the specs:
3.5 wide col
6 col per sec, 9 sec, 12" sec
Overall it's 120 x 30 x 3.5
I'm hoping to get a little confirmation on what I've calculated for the EDR of this Rad. I'm thinking about 10 per section or 90 edr
Here's the specs:
3.5 wide col
6 col per sec, 9 sec, 12" sec
Overall it's 120 x 30 x 3.5
0
Comments
-
-
I am thinking about 125.New England SteamWorks
Service, Installation, & Restoration of Steam Heating Systems
newenglandsteamworks.com0 -
Thanks! I think you're probably right. It throws tons of heat!0
-
If the sections are about 29h X 18w, then 9 sq. ft. per section.Bob Boan
You can choose to do what you want, but you cannot choose the consequences.0
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 976 Plumbing
- 6.3K Radiant Heating
- 387 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements