Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Positioning of circuit setter

Jimbo_5 Member Posts: 218
edited June 2016 in THE MAIN WALL
Does it matter what position a circuit setter is installed in on a 2" or 3" pipe? I mean handle up, down, sideways? Im hearing differing stories. Thanks.


  • hot_rod
    hot_rod Member Posts: 16,806

    Find the installation manual or tech sheet online. The Caleffi Quicksetter can be installed in any position, but I can't speak for others.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Jimbo_5
    Jimbo_5 Member Posts: 218
    Nice, and I agree. But does this apply to all brands/styles of circut setters?
  • lchmb
    lchmb Member Posts: 2,997
    you would need to check the manufacturer in question..each one is different...