Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit

Positioning of circuit setter

Jimbo_5 Member Posts: 213
edited June 2016 in THE MAIN WALL
Does it matter what position a circuit setter is installed in on a 2" or 3" pipe? I mean handle up, down, sideways? Im hearing differing stories. Thanks.


  • hot_rod
    hot_rod Member Posts: 14,786

    Find the installation manual or tech sheet online. The Caleffi Quicksetter can be installed in any position, but I can't speak for others.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Jimbo_5
    Jimbo_5 Member Posts: 213
    Nice, and I agree. But does this apply to all brands/styles of circut setters?
  • lchmb
    lchmb Member Posts: 2,997
    you would need to check the manufacturer in question..each one is different...
Sign In or Register to comment.


It looks like you're new here. If you want to get involved, click one of these buttons!