Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.

heavy duty, pump flange tool

hot_rod
hot_rod Member Posts: 14,760
bolts into standard sized two hole flanges, regardless of paint color :) On larger sized flange one pin in a bolt hole, the other on the outside. One pin is threaded for overhead use.



1/2" thick steel, grade 8 pins, and a 1-1/4 hex. I've used a 36" pipe wrench on mine.



$20.00 plus postage. I have 3 left.



hr
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream

Comments

  • Ironman
    Ironman Member Posts: 6,359
    I'll take one

    Do you want to send me a PM about payment, etc.?
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • Ironman
    Ironman Member Posts: 6,359
    edited June 2012
    Duplicate Post

    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • hot_rod
    hot_rod Member Posts: 14,760
    send me

    your mailing address, Ill ship it off. Thanks!
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Kenny Greene_2
    Kenny Greene_2 Member Posts: 15
    Pump flange tool

    Got any left??
  • hot_rod
    hot_rod Member Posts: 14,760
    I have one

    left, let me know where to ship to, thanks
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • MikeyB
    MikeyB Member Posts: 696
    Curvo

    Hot Rod, any chance of you selling your Rems Curvo machine one of these days? :)
  • hot_rod
    hot_rod Member Posts: 14,760
    cold day in

    before I sell my Curvo
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • MikeyB
    MikeyB Member Posts: 696
    Curvo

    Gotta get me one of those machines one of these days ....
This discussion has been closed.

Welcome

It looks like you're new here. If you want to get involved, click one of these buttons!