Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

heavy duty, pump flange tool

hot_rod
hot_rod Member Posts: 23,364
bolts into standard sized two hole flanges, regardless of paint color :) On larger sized flange one pin in a bolt hole, the other on the outside. One pin is threaded for overhead use.



1/2" thick steel, grade 8 pins, and a 1-1/4 hex. I've used a 36" pipe wrench on mine.



$20.00 plus postage. I have 3 left.



hr
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream

Comments

  • Ironman
    Ironman Member Posts: 7,542
    I'll take one

    Do you want to send me a PM about payment, etc.?
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • Ironman
    Ironman Member Posts: 7,542
    edited June 2012
    Duplicate Post

    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • hot_rod
    hot_rod Member Posts: 23,364
    send me

    your mailing address, Ill ship it off. Thanks!
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Kenny Greene_2
    Kenny Greene_2 Member Posts: 15
    Pump flange tool

    Got any left??
  • hot_rod
    hot_rod Member Posts: 23,364
    I have one

    left, let me know where to ship to, thanks
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • MikeyB
    MikeyB Member Posts: 696
    Curvo

    Hot Rod, any chance of you selling your Rems Curvo machine one of these days? :)
  • hot_rod
    hot_rod Member Posts: 23,364
    cold day in

    before I sell my Curvo
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • MikeyB
    MikeyB Member Posts: 696
    Curvo

    Gotta get me one of those machines one of these days ....
This discussion has been closed.