Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Gordon-Piatt wiring print

J Christensen_2
Member Posts: 6
I have two Gordon-Piatt m# S10.1-g-30 gas burners that I'm having no luck finding a wiring print for. Any leads will be appreciated. JC
0
Comments
-
Flame safeguard
I believe they used a Honeywell RM 7800 on those, I could be mistaken, but I would start there. The flame safeguard dictates the wiring more or less.
I would start there.0 -
Gordon-Piatt
The John Zink Company, LLC decided to discontinue production of Gordon-Piatt burners in 2009. No reason for the discontinuation was ever released. The factory's sales records, material lists, drawings, and tooling were never sold.
Luckily, Cici Boiler Rooms was a GP representative for may years and still has most of the hard-to-find parts. Contact us today to check the price and availability of the part you are looking for!
They also have manuals available
Give us a list of CSD-1 set up on the boiler and we can help you.
They can be reached at 800-848-8197 or sales@ciciboiler.com0
This discussion has been closed.
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 977 Plumbing
- 6.3K Radiant Heating
- 387 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements