Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Gordon-Piatt wiring print
J Christensen_2
Member Posts: 6
I have two Gordon-Piatt m# S10.1-g-30 gas burners that I'm having no luck finding a wiring print for. Any leads will be appreciated. JC
0
Comments
-
Flame safeguard
I believe they used a Honeywell RM 7800 on those, I could be mistaken, but I would start there. The flame safeguard dictates the wiring more or less.
I would start there.0 -
Gordon-Piatt
The John Zink Company, LLC decided to discontinue production of Gordon-Piatt burners in 2009. No reason for the discontinuation was ever released. The factory's sales records, material lists, drawings, and tooling were never sold.
Luckily, Cici Boiler Rooms was a GP representative for may years and still has most of the hard-to-find parts. Contact us today to check the price and availability of the part you are looking for!
They also have manuals available
Give us a list of CSD-1 set up on the boiler and we can help you.
They can be reached at 800-848-8197 or sales@ciciboiler.com0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 878 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements