Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
install manual
Options
lchmb
Member Posts: 2,997
in Gas Heating
Wondering if anyone has any venting information on the Burnham P205pwpi boiler?
0
Comments
-
Let me look around the
office and see what I can find. I could not find anything here in my office at home must be at the training center.
However try this www.usboiler.net/products/boilers/series-2/assets/manual.pdf0 -
Thanks Tim
I am only confused by the PWPI at the end of the model. This boiler was actually vented with Z-vent for 16 feet and sidewall vented. I'm almost positive (99%) that's not right, I just like to get the info for the right unit before I open my mouth..:)0 -
Tom why not get in touch
with Glenn Stanton I know he is back working part time from his sickness I am sure he is able to answer questions. His e-mail is gstanton@usboiler.net0 -
Thanks Tim
I'll try and give Burnham a call today and see if they can send me anything. I've alway's had good luck calling them. (I'll try Glenn tonight if I cant get the info) Thank you for taking time out of your schedule to help, it is greatly appreciated!!0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 60 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 375 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements