Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

install manual

lchmb
lchmb Member Posts: 2,997
in Gas Heating
Wondering if anyone has any venting information on the Burnham P205pwpi boiler?

Comments

  • Tim McElwain
    Tim McElwain Member Posts: 4,588
    edited November 2011
    Let me look around the

    office and see what I can find. I could not find anything here in my office at home must be at the training center.



    However try this www.usboiler.net/products/boilers/series-2/assets/manual.pdf
  • lchmb
    lchmb Member Posts: 2,997
    Thanks Tim

    I am only confused by the PWPI at the end of the model. This boiler was actually vented with Z-vent for 16 feet and sidewall vented. I'm almost positive (99%) that's not right, I just like to get the info for the right unit before I open my mouth..:)
  • Tim McElwain
    Tim McElwain Member Posts: 4,588
    Tom why not get in touch

    with Glenn Stanton I know he is back working part time from his sickness I am sure he is able to answer questions. His e-mail is [email protected]
  • lchmb
    lchmb Member Posts: 2,997
    Thanks Tim

    I'll try and give Burnham a call today and see if they can send me anything. I've alway's had good luck calling them. (I'll try Glenn tonight if I cant get the info) Thank you for taking time out of your schedule to help, it is greatly appreciated!!
This discussion has been closed.

Categories