ASTM F1281 Oxygen Barrier PEX-AL-PEX Tubing Available – Bulk Pricing Below $1/ft

Pipe_Guy46

I have 60,000 feet of brand-new PEX-AL-PEX oxygen barrier tubing available at bulk pricing.

Inventory available:

• 3/4" PEX-AL-PEX – 40,000 ft available
• 1" PEX-AL-PEX – 20,000 ft available

This tubing is new, unused, and still in factory coils. It is marked ASTM F1281 and is ideal for:

• Hydronic heating systems
• Radiant floor heating
• Snow melt applications
• Closed-loop HVAC systems
• Other non-potable heating and cooling applications

Available in 10,000 ft increments, with better pricing available for larger purchases.

Great opportunity for:

• HVAC contractors
• Plumbing contractors
• Hydronic installers
• Distributors
• Wholesalers

If you are interested in pricing or availability, send me a message with the quantity you are looking for.

Thank you!

Jarrod Prifogle

Rexarc International

jprifogle@rexarc.com

937 839 4608 x 118

HydronicMike

Sounds like you're just a guy selling tubing. NO Full name, NO company, NO address, NO Business phone number?

Pipe_Guy46

Hydronic Mike, I have updated my post with the information your were looking for! I apologize, I have never posted anything on this site, and didn't know what to expect.

Steamhead

https://forum.heatinghelp.com/discussion/comment/1899730#Comment_1899730

What brand is the pipe?

Pipe_Guy46

This is the Rexarc brand — we call it RexFlex. It's structurally the same as the 5-layer pipe you'd buy from the big wholesalers and distributors.

If you'd like to go into more detail, I'd love to hop on a call and talk it through. And if you think it could be a good fit, I'm happy to send you a free 50 ft roll so you can put the actual piping in your hands.

hot_rod

Is this a compressed air tube? Got a pic of the listings printed on the tube? DIN 4726?

Steamhead

https://rexarc.com/

Pipe_Guy46

Thanks for the link, Steamhead! The pipe looks just like the website shows. The difference is that on our website, it's listed for inert gas only.

We received a shipment of HVAC non-potable PEX-AL-PEX, and rather than pay to ship it back, we're trying to find someone in the industry who could benefit from the considerably marked-down piping.

Again, if you'd like to talk more about it — and if we think it's a good fit — I can put a sample roll in your hands!

Pipe_Guy46

HOT ROD - This is what is printed on the pipe! The specification code is ASTM F1281

Ironman

It looks the same as Roth which has been discontinued.

Pipe_Guy46

Ironman, this is not Roth, it is Rexflex, this batch was just spec'd incorrectly and not for inert gas, which is what we need