Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

ASTM F1281 Oxygen Barrier PEX-AL-PEX Tubing Available – Bulk Pricing Below $1/ft

Options
Pipe_Guy46
Pipe_Guy46 Member Posts: 6
edited July 17 in Buy, Sell, Barter

I have 60,000 feet of brand-new PEX-AL-PEX oxygen barrier tubing available at bulk pricing.

Inventory available:

  • 3/4" PEX-AL-PEX – 40,000 ft available
  • 1" PEX-AL-PEX – 20,000 ft available

This tubing is new, unused, and still in factory coils. It is marked ASTM F1281 and is ideal for:

  • Hydronic heating systems
  • Radiant floor heating
  • Snow melt applications
  • Closed-loop HVAC systems
  • Other non-potable heating and cooling applications

Available in 10,000 ft increments, with better pricing available for larger purchases.

Great opportunity for:

  • HVAC contractors
  • Plumbing contractors
  • Hydronic installers
  • Distributors
  • Wholesalers

If you are interested in pricing or availability, send me a message with the quantity you are looking for.

Thank you!

Jarrod Prifogle

Rexarc International

jprifogle@rexarc.com

937 839 4608 x 118

Comments

  • HydronicMike
    HydronicMike Member Posts: 390

    Sounds like you're just a guy selling tubing. NO Full name, NO company, NO address, NO Business phone number?

  • Pipe_Guy46
    Pipe_Guy46 Member Posts: 6

    Hydronic Mike, I have updated my post with the information your were looking for! I apologize, I have never posted anything on this site, and didn't know what to expect.

    GGrossrick in Alaska
  • Steamhead
    Steamhead Member Posts: 18,753
    https://forum.heatinghelp.com/discussion/comment/1899730#Comment_1899730

    What brand is the pipe?

    All Steamed Up, Inc.

    Baltimore, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting

  • Pipe_Guy46
    Pipe_Guy46 Member Posts: 6

    This is the Rexarc brand — we call it RexFlex. It's structurally the same as the 5-layer pipe you'd buy from the big wholesalers and distributors.

    If you'd like to go into more detail, I'd love to hop on a call and talk it through. And if you think it could be a good fit, I'm happy to send you a free 50 ft roll so you can put the actual piping in your hands.

  • hot_rod
    hot_rod Member Posts: 27,961

    Is this a compressed air tube? Got a pic of the listings printed on the tube? DIN 4726?

    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Steamhead
    Steamhead Member Posts: 18,753

    https://rexarc.com/

    All Steamed Up, Inc.

    Baltimore, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting

  • Pipe_Guy46
    Pipe_Guy46 Member Posts: 6

    Thanks for the link, Steamhead! The pipe looks just like the website shows. The difference is that on our website, it's listed for inert gas only.

    We received a shipment of HVAC non-potable PEX-AL-PEX, and rather than pay to ship it back, we're trying to find someone in the industry who could benefit from the considerably marked-down piping.

    Again, if you'd like to talk more about it — and if we think it's a good fit — I can put a sample roll in your hands!

  • Pipe_Guy46
    Pipe_Guy46 Member Posts: 6

    HOT ROD - This is what is printed on the pipe! The specification code is ASTM F1281

    HVAC - REXFLEX - 1.jpg HVAC - REXFLEX - 2.jpg
  • Ironman
    Ironman Member Posts: 7,937

    It looks the same as Roth which has been discontinued.

    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • Pipe_Guy46
    Pipe_Guy46 Member Posts: 6

    Ironman, this is not Roth, it is Rexflex, this batch was just spec'd incorrectly and not for inert gas, which is what we need

Categories