Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Q90-100 Dunkirk not coming on
Ironbeard_23
Member Posts: 6
I have the a dunkirk q90-100. It goes through the whole process of turning on until it hits the flame light it stops. Had a person come and said it could be the pressure stich. Also the blower motor was staying stuck and wouldn't spin. So both were switched. Need help. Live in chicago. Temps aren't the best right now.
0
Comments
-
Sounds like you got a parts changer. You need someone there to measure the amperage of the motor and the pressure at the switch.Call them back and ask for a more senior tech.
2 -
Realized he didn't know what he was doing after it did the same thing with the new parts0
-
I've added a link to show what it does0
-
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 88 Chimneys & Flues
- 2K Domestic Hot Water
- 5.3K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 910 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements