Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Vaporstat Model

Bruce_29
Member Posts: 9
I have read past posts on vaporstat with range of 16oz max, If I want cut in at .5 psig (8oz) and cut out at 1.5 psig (24 oz) how do I do that with a 16 oz max vaporstat?
Can anyone recommend a vaporstat model for .5/1.5 psig? If not how about a pressuretrol model and best place to get one?
Can anyone recommend a vaporstat model for .5/1.5 psig? If not how about a pressuretrol model and best place to get one?
0
Comments
-
For that pressure range you need the 0 to 4 psi vapourstat. L408J1017Br. Jamie, osb
Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England0 -
Let's back up and ask why you want to run it that high?0
Categories
- 120.9K All Categories
- 83.8K THE MAIN WALL
- 2.8K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 416 Carbon Monoxide Awareness
- 36 Chimneys & Flues
- 1.7K Domestic Hot Water
- 4.7K Gas Heating
- 116 Geothermal
- 154 Indoor-Air Quality
- 2.9K Oil Heating
- 49 Pipe Deterioration
- 754 Plumbing
- 5.3K Radiant Heating
- 358 Solar
- 13.9K Strictly Steam
- 3K Thermostats and Controls
- 50 Water Quality
- 37 Industry Classes
- 70 Job Opportunities
- 14 Recall Announcements