Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Cross Control connections
Comments
-
I did like the cows.0
-
I cannot follow your description.
If you post a sketch showing which wires you have connected to which terminals, we can check your work."If you can't explain it simply, you don't understand it well enough"
Albert Einstein0 -
I have spent the last multiple hours trying again to find a way to provide you with a drawing. I really just do not know how. I do not understand what you need to see.
There is really nothing to see. I have described the connections to both the controller and the wires to the Tekmar. I have shone you what the manufacturer shows. There just is nothing else I can give you.0 -
Sorry, I am unable to help. The wire colors mean nothing to me, my mind sees circuits. If I was doing this for myself, I would draw it out and then wire it."If you can't explain it simply, you don't understand it well enough"
Albert Einstein0 -
OK - I understand.
Any recommendation of where to go for help? It is really a confusing system for me. The connections are a requirement that I do not understand.
Floods and temperatures are not helpful.0
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 88 Chimneys & Flues
- 2K Domestic Hot Water
- 5.3K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 910 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements