Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Banging!!!!

2»

Comments

  • T1263
    T1263 Member Posts: 36
    The left of that pic goes toward boiler.
    That elbow then on the right side of the picture slopes up and continues to the vertical pipe in the wall of first floor bathroom. It’s now propped up an inch or so 
    LS123
  • ethicalpaul
    ethicalpaul Member Posts: 7,000
    T1263 said:
    said he used copper cuz was easier to connect between the other ends of steam pipe because of treads.
    Tell him your computer programmer friend said he should look into these things called “unions”

    Congrats on finding the problem! Hopefully you’ll be able to keep the problem from coming back...into your house...to work on your steam system

    NJ Steam Homeowner.
    Free NJ and remote steam advice: https://heatinghelp.com/find-a-contractor/detail/new-jersey-steam-help/
    See my sight glass boiler videos: https://bit.ly/3sZW1el

    LS123
  • LS123
    LS123 Member Posts: 476
    @ethicalpaul ... its nice to see other computer program, systems , management individuals in this forum.... @T1263 what program did you use to do the heat loss calc? just wondering... thank you!
    Thank you!
    @LS123
  • T1263
    T1263 Member Posts: 36
    @ethicalpaul - worth a laugh this morning!
    he said it was just easier lol
    honestly as long as it’s quiet now I’m ok with it.
    I did mention to him that I “consulted with multiple specialists” and to his credit he was not dismissive or defensive. He listened to me and approached accordingly n we got it in the first shot!
    @LS123 what heat loss calculation?
    Again- thank you! 
    This has been great!
    Be well!
    ethicalpaul

Categories