Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.

boiler school

class101
class101 Member Posts: 2
i am looking for a school that offers boiler classes in nyc.
thanks

Comments

  • hot_rod
    hot_rod Member Posts: 14,871
    Check with local wholesalers and manufacturers reps, training is going on all the time, somewhere.

    Steam? Hot water? Mod Con, lots of boiler options these days.

    Also check the various boiler manufacturers website, they usually have their factory and off site training schedules posted.

    More and more you see online training, webinars, and You Tube channels for training without traveling.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Zman
    Zman Member Posts: 6,792
    If RI is not too far, you might hit up @Tim McElwain before he retires.
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
    kcoppmattmia2
  • class101
    class101 Member Posts: 2
    that's a great idead,i will check with the manifacturers.
    ri i way too far ,i am based in the city.
    i apreciate you guidance guys.
    thank you
  • hot_rod
    hot_rod Member Posts: 14,871
    Rathe and Associates on L.I. does a lot of training. They have a nice hands on training wall with various boilers.


    http://www.ratheassociates.com/training.html
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Tim McElwain
    Tim McElwain Member Posts: 4,477
    Class101 RI is not that far in fact I have had folks come for training from England and Alaska.
    rick in Alaska
  • Steamhead
    Steamhead Member Posts: 14,766
    JohnNY said:

    I teach a Boiler Basics/Hydronic Heating Systems class at The General Society of Mechanics and Tradesmen's "Mechanics Institute" at 20 W 44th St.
    www.GeneralSociety.org

    @class101 , this is the one to take. @JohnNY is about as good as it gets.
    All Steamed Up, Inc.
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
    mattmia2
  • JohnNY
    JohnNY Member Posts: 2,718
    Steamhead said:

    JohnNY said:

    I teach a Boiler Basics/Hydronic Heating Systems class at The General Society of Mechanics and Tradesmen's "Mechanics Institute" at 20 W 44th St.
    www.GeneralSociety.org

    @class101 , this is the one to take. @JohnNY is about as good as it gets.
    Yeah. What he said. :)
    Contact John "JohnNY" Cataneo, Master Plumber
    in New York
    in New Jersey
    for Consulting Work
    or take his class.
    ZmanJellis
  • FortyTwo
    FortyTwo Member Posts: 46
    do you know when the next class is?