Single Riser with Drop Header Question

Dave0176

@Charlie from wmass

EBEBRATT-Ed

@krisnet55
1 riser will be fine especially if you upsize it to 3"

ethicalpaul

I found the smallest Peerless 603 (at my local supply house, Wallington!) available for not that much more than the smallest WM so now I'm leaning toward Peerless for this summer's replacement. I will be able to harvest my LWCO from my Utica I think.

Charlie from wmass

@ethicalpaul boiler comes with a new LWCO

ethicalpaul

Charlie from wmass said:

@ethicalpaul boiler comes with a new LWCO

And I've heard great things about it, too!!!

Charlie from wmass

They are fine. Mountain out of a molehill.

ethicalpaul

Thanks @Charlie from wmass I am open to that idea being a skeptical person generally!

I would leave it on to try it out, but I think I saw someone say they are 120v

Charlie from wmass

24 volt on gas 120 0n oil or gas power burner

bob young

hey clamster, glad you are well & still in the game. i am gearing down now that i hit 75 !! bob nyc

clammy

Yes still in the game never left .Still doing the same stuff I hope by 75 I’m still on the green side of the turf and will most likely still be doing able to work . I glad to see ur still on the sun side side peace and good luck clammy