Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Honeywell Pressuretrol Model for one pipe steam
Bruce_29
Member Posts: 9
What model Honeywell Pressuretrol and also model vaporstat should be used for one pipe steam?
0
Comments
-
For most one pipe steam systems, the standard pressuretrol will do, if properly calibrated and set as low as it would go. (0.6 psi cutin, 1 psi differential). The 0 to 4 psi vapourstat would give more precise control, but is probably overkill, considering the price.Br. Jamie, osb
Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England0 -
Pressuretrol Model: PA404A1033
Vaporstat model: L408J10090
Categories
- 121.3K All Categories
- 84K THE MAIN WALL
- 2.9K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 417 Carbon Monoxide Awareness
- 40 Chimneys & Flues
- 1.7K Domestic Hot Water
- 4.7K Gas Heating
- 119 Geothermal
- 155 Indoor-Air Quality
- 3K Oil Heating
- 56 Pipe Deterioration
- 772 Plumbing
- 5.4K Radiant Heating
- 362 Solar
- 14K Strictly Steam
- 3K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 73 Job Opportunities
- 19 Recall Announcements