Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Gas heating - Gas Valve or Circuit Board?

2»

Comments

  • Jamie Hall
    Jamie Hall Member Posts: 25,599
    Also check the pin fit on that Molex -- a loose fit of a pin in its socket can cause all kinds of weird problems.
    Br. Jamie, osb
    Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England
  • Tim McElwain
    Tim McElwain Member Posts: 4,649
    You should never resolder any boards. There is a tremendous liability should anything go wrong. REPLACE THE BOARD!!!
  • highrollar420
    highrollar420 Member Posts: 2
    I see this thread was from awhile ago but did you double check your inducer motor started up? Not the blower motor

Categories