Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

What manufacturer/model of furnace is this?

vodkanada
vodkanada Member Posts: 3
edited December 2016 in Gas Heating
For reasons that escape me, I cant find out who the maker of this furnace is. There's nothing written on it.

It's stopped heating the house, its just blowing cold air now. I assume the pilot light is out? But we know virtually nothing about these things, I was hoping if i could find out the maker I could find some steps to resolve the issue.

Comments

  • BobC
    BobC Member Posts: 5,495
    We have no way of guessing what it might be without a few pictures.

    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
    vodkanada
  • vodkanada
    vodkanada Member Posts: 3
    null
    Holy crap, I apologize. I was having uploading problems. It should be up now.
  • BobC
    BobC Member Posts: 5,495
    The pics have to be jpg's or pdf's and reasonable sized.

    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 16,248
    There must be a nameplate on it somewhere. Did you take the cover off and look inside?

    Regardless, you need a competent service tech
  • vodkanada
    vodkanada Member Posts: 3
    Got some more pics. So this doesn't seem to be one where we light the pilot light, seems to do it itself.
    There's a panel of diagnostic light codes, but nothing seems to be flashing.
  • Ironman
    Ironman Member Posts: 7,510
    Looks like a York product, but none of your pics actually included the full model number.

    Regardless, there's no pilot for you to light; everything is electronic. You need to get a competent tech out there.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • Abracadabra
    Abracadabra Member Posts: 1,948
    What's the code the board is flashing?
  • Brp814
    Brp814 Member Posts: 22
    Looks to me like the make is an ICP furnace. Either an ArcoAire, or maybe a Heil. Hope this helps
  • Fred
    Fred Member Posts: 8,542
    Brp814 said:

    Looks to me like the make is an ICP furnace. Either an ArcoAire, or maybe a Heil. Hope this helps

    I have an ArcoAire. It looks nothing like that, inside or out. I doubt it's ArcoAire.
  • John Mills_5
    John Mills_5 Member Posts: 952
    edited December 2016
    It is an ICP of some sort.
  • ratio
    ratio Member Posts: 3,774
    Look at this and this.
    delta TKoan
  • Koan
    Koan Member Posts: 439
    @ratio wins

Categories