Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Steamhead, look!

ChrisJ
ChrisJ Member Posts: 16,121
in THE MAIN WALL
@Steamhead
Though of you when I saw this on the Facebook group mechanical-hub.com




Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment

Comments

  • SWEI
    SWEI Member Posts: 7,356
    Foamcore DWV pipe paired with poor combustion?
  • Solid_Fuel_Man
    Solid_Fuel_Man Member Posts: 2,646
    That ell looks toasted as well. NICE!

    SFM
    Serving Northern Maine HVAC & Controls. I burn wood, it smells good!
  • BobC
    BobC Member Posts: 5,491
    But that pipe was on sale and the guy at HD said it was just as good.

    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
  • ChrisJ
    ChrisJ Member Posts: 16,121
    BobC said:

    But that pipe was on sale and the guy at HD said it was just as good.

    Bob

    Yeah.
    Because that looks like a homeowner installed it...............

    This is a botch job but it's not by any DIYer.
    Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment
  • Steamhead
    Steamhead Member Posts: 17,209
    You can't fix stupid!

    UL-approved venting materials only.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
    SWEI
  • ttekushan_3
    ttekushan_3 Member Posts: 960
    Hmmm. Salvador Dali's furnace.

    Terry T

    steam; proportioned minitube; trapless; jet pump return; vac vent. New Yorker CGS30C

    CLamb
  • rick in Alaska
    rick in Alaska Member Posts: 1,459
    I don't know the furnace and can't tell, but is it a condensing furnace or induced draft? Maybe should be b-vent.
    Rick
  • Paul S_3
    Paul S_3 Member Posts: 1,261
    Its a condensing furnace
    ASM Mechanical Company
    Located in Staten Island NY
    Servicing all 5 boroughs of NYC.
    347-692-4777
    ASMMECHANICALCORP@GMAIL.COM
    ASMHVACNYC.COM
    https://heatinghelp.com/find-a-contractor/detail/asm-mechanical-company
  • SlamDunk
    SlamDunk Member Posts: 1,634
    That's not stupid, it is ignorance; Totally repairable with the added bonus of being able to say they now have "experience".
  • ChrisJ
    ChrisJ Member Posts: 16,121
    That's exactly the kind of experience I never want in my house.
    Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment
  • SlamDunk
    SlamDunk Member Posts: 1,634
    edited March 2016
    just a fancy word for mistake.
  • Bob Bona_4
    Bob Bona_4 Member Posts: 2,083
    Wonder what the cause was.
  • ratio
    ratio Member Posts: 3,747
    Is it a condensing furnace? Look at the size of the opening the flue comes out of, & the handle on the door. I don't think it's a condensing furnace. I have no clue how the intake would have gotten in there though. I can't imagine anyone being that shady, but I can't imagine anyone being that stoopid either.

    It boggles the mind.

    Bob Bona_4
  • egansen
    egansen Member Posts: 31
    I'm just a home owner but if that is an Elite Series Lenox like mine the combustion air intake is in the center and the exhaust is on the left. Very interesting.
  • JUGHNE
    JUGHNE Member Posts: 11,199
    edited March 2016
    There were 80% plus furnaces with combustion air inlets to be piped to the outside. The exhaust would have been 3" single wall galv going into B vent. Without the door removed we may never know.....metallic exhaust fan or non-metallic?

    Some electricians would bend PVC conduit by sticking the pipe over the exhaust of their truck or back hoe. Never tried it myself but now know it works.

Categories