Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

just installed another steam boiler

Paul S_3
Paul S_3 Member Posts: 1,281
in THE MAIN WALL
2 3" risers ...3" drop header ...2" equalizer. ..total edr 315 sq ft.....installed williamson gsa-125 rated for 320 sq ft.....going back tomorrow to install back flow preventer and 50 gallon water heater. .....feel free to critique....Paul S
ASM Mechanical Company
Located in Staten Island NY
Servicing all 5 boroughs of NYC.
347-692-4777
ASMMECHANICALCORP@GMAIL.COM
ASMHVACNYC.COM
https://heatinghelp.com/find-a-contractor/detail/asm-mechanical-company

Comments

  • Paul S_3
    Paul S_3 Member Posts: 1,281
    Drop header
    ASM Mechanical Company
    Located in Staten Island NY
    Servicing all 5 boroughs of NYC.
    347-692-4777
    ASMMECHANICALCORP@GMAIL.COM
    ASMHVACNYC.COM
    https://heatinghelp.com/find-a-contractor/detail/asm-mechanical-company
    Tinmanjonny88LionA29
  • BobC
    BobC Member Posts: 5,504
    Beautiful work, I'm sure they will be very happy with it.

    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
  • Fred
    Fred Member Posts: 8,542
    Beautiful installation! They should be set for many years to come.
  • EzzyT
    EzzyT Member Posts: 1,344
    Beautiful work Paul. Going to be some dry steam going on there
    E-Travis Mechanical LLC
    Etravismechanical@gmail.com
    201-887-8856
  • Dave0176
    Dave0176 Member Posts: 1,178
    Nice job Paul, good to see more of us around......
    DL Mechanical LLC Heating, Cooling and Plumbing 732-266-5386
    NJ Master HVACR Lic# 4630
    Specializing in Steam Heating, Serving the residents of New Jersey
    https://heatinghelp.com/find-a-contractor/detail/dl-mechanical-llc

    https://m.facebook.com/DL-Mechanical-LLC-315309995326627/?ref=content_filter

    I cannot force people to spend money, I can only suggest how to spend it wisely.......
  • JohnNY
    JohnNY Member Posts: 3,297
    Very nice installation. Expertly executed, but maybe we can get 2 or 3 contributors here to dump all over it for you.
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting & Troubleshooting
    Heating in NYC or NJ.
    Classes
    AbracadabraSWEI
  • MPJ347
    MPJ347 Member Posts: 19
    That was very funny John, it made my morning. Thx
    Rich_49
  • Rich_49
    Rich_49 Member Posts: 2,769
    edited January 2016
    Really not very funny . This is a public forum and as such is open for debate and opinions .

    Much more provocative and juvenile than anything else , sorry John .

    This is not a mutual admiration society as much as a platform to help those less fortunate who have received poorly installed systems and components as well as a place where your perceived peers can critique or praise what you have done . If someone is not willing to accept either / or he probably should not post .

    Just my opinion about freedom of speech and the need to not censure posters or discussions . Toughen up , we are all men .
    You didn't get what you didn't pay for and it will never be what you thought it would .
    Langans Plumbing & Heating LLC
    732-751-1560
    Serving most of New Jersey, Eastern Pa .
    Consultation, Design & Installation anywhere
    Rich McGrath 732-581-3833
    jonny88CanuckerHatterasguy
  • JohnNY
    JohnNY Member Posts: 3,297
    Rich said:


    This is not a mutual admiration society ...

    Are you sure everyone knows about this? Its seems a little clique-y around here lately.
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting & Troubleshooting
    Heating in NYC or NJ.
    Classes
  • Fred
    Fred Member Posts: 8,542
    There is constructive criticism and then there are those who just want to stroke their own egos by slamming what everyone else says or does. There are many ways to get a good/great result and, I am sure most, on this site, want to learn how to be/do better but that is encumbered by those who think they always have the right solution and no one else can do it right that it creates an environment where people become apprehensive about saying something wrong (so they can be corrected in a constructive way) or even offering an opinion/suggestion (which in and of itself is a form of sensorship. Don't get me wrong @Rich , I'm not talking about you. Those individuals know who they are.
    Double D
  • Charlie from wmass
    Charlie from wmass Member Posts: 4,386
    Gee you never put a clip on the damper wire and the nipples are not 6" long going to the header. ( @JohnNY is that better?)
    @Paul S nice job.
    Cost is what you spend , value is what you get.

    cell # 413-841-6726
    https://heatinghelp.com/find-a-contractor/detail/charles-garrity-plumbing-and-heating
    Canucker

Categories