Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Should I insulate the fresh air intake?
Options
Tundra
Member Posts: 93
Do not insulate the combustion air. This will allow the combustion air to warm somewhat. You should use at least eight feet of 4" metal pipe on an outside air intake. I consistently use twice that with good results.
0
Comments
-
Should I insulate the fresh air intake?
I have twenty feed of 4-inch steel ductwork that brings fresh air to my oil burner with a Fields Controls sleeve.
Is it worth the money to insulate this pipe to prevent the heat drain?
Is the boiler flame temperature any different when it is fed with 0* air versus 70* inside air? The thing I like is that the clothes dryer lint will no longer clog the burner vents.Steve from Denver, CO0 -
Probably not mandatory that you insulate it if you are not getting condensation on it, Combustion is better if the air is warmer-but if you insulate it won't the air stay colder???
Ed0 -
Yes, the insulation will make the air colder. So since there is no condensation, sounds like I should leave it alone.Steve from Denver, CO0
This discussion has been closed.
Categories
- All Categories
- 87.6K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 430 Carbon Monoxide Awareness
- 124 Chimneys & Flues
- 2.2K Domestic Hot Water
- 5.9K Gas Heating
- 120 Geothermal
- 168 Indoor-Air Quality
- 3.8K Oil Heating
- 78 Pipe Deterioration
- 1K Plumbing
- 6.6K Radiant Heating
- 394 Solar
- 16K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements
