Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Radiant walls in basement
Options
Weezbo
Member Posts: 6,231
around the exterior of the concrete would be a benifit.
0
Comments
-
Radiant walls in basement - Insulation
Just a question....What is the recommended procedure for radiant walls and insulation in a basement....I have 8" thick poured concrete walls, then 1/2 vapor barrier foam board, then 2x4 studs....I plan on screwing aluminium plates to studs in a vertical fashion and running 3/8" PEX through the plates, approx 10" centers....I've been looking at standard paper faced fiberglass insulation, but seem to remember reading that paper faced may not be a good selection....What should I use? Unfaced? Foil faced?0
This discussion has been closed.
Categories
- All Categories
- 87.8K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 59 Biomass
- 430 Carbon Monoxide Awareness
- 129 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 122 Geothermal
- 170 Indoor-Air Quality
- 3.8K Oil Heating
- 79 Pipe Deterioration
- 1.1K Plumbing
- 6.6K Radiant Heating
- 396 Solar
- 16K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 17 Recall Announcements