Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Quick Tac and dirt
Josh_10
Member Posts: 786
Anybody found a good way to keep sand out of the cracks of QuickTac during the construction phase? I tried cardboard.. I am worried that even a small sand grain can cause a leak if the tube expands and contracts for several years.
0
Comments
-
Red Rosin Paper...
everywhere, taped down and telling everyone to be carefull. I had the same problem on a job and acted 1/2 like a jerk to keep everyone off until the floor went down...shop vac every day multiple times...kpc
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 87.1K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 58 Biomass
- 427 Carbon Monoxide Awareness
- 114 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 110 Geothermal
- 161 Indoor-Air Quality
- 3.6K Oil Heating
- 71 Pipe Deterioration
- 999 Plumbing
- 6.3K Radiant Heating
- 392 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 55 Water Quality
- 46 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements