Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Quick Tac and dirt
Josh_10
Member Posts: 787
Anybody found a good way to keep sand out of the cracks of QuickTac during the construction phase? I tried cardboard.. I am worried that even a small sand grain can cause a leak if the tube expands and contracts for several years.
0
Comments
-
Red Rosin Paper...
everywhere, taped down and telling everyone to be carefull. I had the same problem on a job and acted 1/2 like a jerk to keep everyone off until the floor went down...shop vac every day multiple times...kpc
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 88 Chimneys & Flues
- 2K Domestic Hot Water
- 5.3K Gas Heating
- 98 Geothermal
- 155 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 909 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements